FX2 Control Board

The FX-2 Control Board is the most advanced cabin control manufactured by Micro-Air and is one of the most advanced cabin controls in the marine HVAC industry. It not only provides support for the latest FX-2 control displays, it supports all of the legacy FX-1 control displays as well (configured by jumpers).

Benefits of the FX-2 Control Board:

• Direct expansion, Air handler, and Fresh air makeup unit capable
• 100-240VAC compatible.
• Optional EasyStart for low current starts.
• Monitors sea water temperature preventing potential compressor damage
• Humidity control capable
• Electric heat AND reverse cycle capable.
• Built and programmed to handle the marine environment unlike competing controls.
• Connect wirelessly using EasyTouch
• Supports CAN communication systems like Crestron™
• Remotely mount the display up to 75 feet away.
• Variable independent fan speed control.
• Direct connection to a DC fan.

FX-2 Control Board - Most Advanced Marine Cabin Control Board in the World

• Automatically Supports All FX-2, FX-1 Legacy Control Displays

• Controls DX equipment, CW air handlers, with an auxiliary Electric Heater

• Single Control Board supports Optional Combo Temp/Humidity Air Sensor, CAN Bus, and Fresh Air Make-up (FAMU) systems

The FX-2 Control Board is the most advanced cabin control manufactured by Micro-Air and is one of the most advanced cabin controls in the marine HVAC industry. It not only provides support for the latest FX-2 control displays, it supports all of the legacy FX-1 control displays as well (configured by jumpers).

Control Board Features and options:

• Universal 115/230 VAC 50/60 Hz power supply
• 2HP compressor output and 1/2 HP sea water pump output
• Reversing valve AC output controls either valve or electric heater
• High and low refrigerant pressure switch inputs
• 8-pin RJ-45 Display Interface
• Alternate (remote) air temperature sensor
• Outside air temperature sensor
• Service (condenser) temperature sensor for Pump Sentry
• Built-in CAN bus support (rev K and newer)
• Built-in support for up to 2 combo temp/humidity sensors for cabin humidity control or for FAMU operation (rev K and newer).
• Optional daughterboards for DC blowers and EasyStart

Contact form...