EasyStart 364 3T

EasyStart™ 364 (3-ton) Soft Starter - Your A/C compressor motor current soars at startup and compressor starts often draw 4 to 6 times the normal running current.

This can cause lights to dim, generators to stall, breakers to trip, or marginal inverters to simply not work, and it may even damage other devices connected to your electrical system.

EasyStart 368 6T

EasyStart™ 368 (6-ton) Soft Starter - EasyStart™ is a one-of-a-kind, custom-developed soft starter for single-phase motors. It can support both 115 and 230VAC motors.

It employs a 4-part start ramp sequence that is self-optimising, resulting in the lowest possible start-up current.

EasyStart 366 SoftStarter

EasyStart™ 366 Soft Starter (board-only) - EasyStart™ is a one-of-a-kind, custom-developed soft starter for single-phase motors. It can support both 115 and 230VAC motors. It employs a 4-part start ramp sequence that is self-optimising, resulting in the lowest possible start-up current.

EasyStart 364 Installation Kit

EasyStart™ 364 Installation Kit for RV Rooftop A/Cs - The EasyStart™ 364 soft starter requires a few miscellaneous components for its installation into the different model RV rooftop A/C systems from the various manufacturers.

Start Capacitors

Start Capacitors for EasyStart™ 366 - EasyStart™ 366 requires that you wire in your own compressor start capacitor. The values required are described in the table below.

Replacement Relay

Compressor Triac Replacement Relay - When used with a high-current triac that controls the compressor switching, EasyStart requires that the triac be replaced with a power relay.

This replacement relay is design with mounting that matches the footprint of the Sanrex® TG35F40 triac, commonly used in marine air conditioners.

EasyTouch Controller

The EasyTouch™ Display Control is Micro-Air's the newest display control, and it employs the very latest microcontroller and TFT LCD technology. It has a user-friendly, 2.5" color, touch screen and is designed for use with direct expansion, reverse-cycle air conditioning systems or with chilled-water air handlers.

FX-2 Control Board

The FX-2 Control Board is the most advanced cabin control manufactured by Micro-Air and is one of the most advanced cabin controls in the marine HVAC industry. It not only provides support for the latest FX-2 control displays, it supports all of the legacy FX-1 control displays as well (configured by jumpers).